6.9 The potential energy of a spring

THE POTENTIAL ENERGY OF A SPRING

The spring force is an example of a variable force which is conservative. Figure 6.7 shows a block attached to a spring and resting on a smooth horizontal surface. The other end of the spring is attached to a rigid wall. The spring is light and may be treated as massless. In an ideal spring, the spring force \(F_{s}\) is proportional to \(x\) where \(x\) is the displacement of the block from the equilibrium position. The displacement could be either positive Figure 6.7(b) or negative Figure 6.7(c). This force law for the spring is called Hooke’s law and is mathematically stated as
\(F_{s}=-k x\)
The constant \(k\) is called the spring constant. Its unit is \(\mathrm{N} \mathrm{m}^{-1}\). The spring is said to be stiff if \(k\) is large and soft if \(k\) is small.

Suppose that we pull the block outwards as in Figure 6.4(b). If the extension is \(x_{m}\), the work done by the spring force is
\(
\begin{array}{l}
W_{s}=\int_{0}^{x_{m}} F_{s} \mathrm{~d} x=-\int_{0}^{x_{m}} k x \mathrm{~d} x \\
=-\frac{k x_{m}^{2}}{2}
\end{array}
\)
This expression may also be obtained by considering the area of the triangle as in Figure 6.7(d). Note that the work done by the external pulling force \(F\) is positive since it overcomes the spring force.
\(W=+\frac{k x_{m}^{2}}{2}\)

The same is true when the spring is compressed with a displacement \(x_{c}(<0)\). The spring force does work \(W_{s}=-k x_{c}^{2} / 2\) while the external force \(F\) does work \(+k x_{c}^{2} / 2\). If the block is moved from an initial displacement \(x_{i}\) to a final displacement \(x_{f}\), the work done by the spring force \(W_{s}\) is
\(W_{s}=-\int_{x_{i}}^{x_{f}} k x \mathrm{~d} x=\frac{k x_{i}^{2}}{2}-\frac{k x_{f}^{2}}{2} \dots (6.9)\)
Thus the work done by the spring force depends only on the end points. Specifically, if the block is pulled from \(x_{i}\) and allowed to return to \(x_{i}\);
\(W_{s}=-\int_{x_{i}}^{x_{i}} k x \mathrm{~d} x=\frac{k x_{i}^{2}}{2}-\frac{k x_{i}^{2}}{2} = 0\)

The work done by the spring force in a cyclic process is zero. We have explicitly demonstrated that the spring force (i) is position-dependent only as first stated by Hooke, \(\left(F_{s}=-k x\right)\); (ii) does work which only depends on the initial and final positions, e.g. Equation (6.9). Thus, the spring force is a conservative force.

We define the potential energy \(V(x)\) of the spring to be zero when the block and spring system is in the equilibrium position. For an extension (or compression) \(x\) the above analysis suggests that
\(V(x)=\frac{k x^{2}}{2} \dots (6.10)\)
You may easily verify that \(-\mathrm{d} V / \mathrm{d} x=-k x\), the spring force. If the block of mass \(m\) in Figure 6.4 is extended to \(x_{m}\) and released from rest, then its total mechanical energy at any arbitrary point \(x\), where \(x\) lies between \(-x_{m}\) and \(+x_{m}\) will be given by
\(\frac{1}{2} k x_{m}^{2}=\frac{1}{2} k x^{2}+\frac{1}{2} m v^{2}\)
where we have invoked the conservation of mechanical energy. This suggests that the speed and the kinetic energy will be maximum at the equilibrium position, \(x=0\), i.e.,
\(\frac{1}{2} m v_{m}^{2}=\frac{1}{2} k x_{m}^{2}\)
where \(v_{m}\) is the maximum speed.
or \(v_{m}=\sqrt{\frac{k}{m}} x_{m}\)
Note that \(k / m\) has the dimensions of \(\left[\mathrm{T}^{-2}\right]\) and our equation is dimensionally correct. The kinetic energy gets converted to potential energy and vice versa, however, the total mechanical energy remains constant. This is graphically depicted in Figure 6.5.

Figure 6.8

Example 6.13:

To simulate car accidents, auto manufacturers study the collisions of moving cars with mounted springs of different spring constants. Consider a typical simulation with a car of mass \(1000 \mathrm{~kg}\) moving with a speed \(18.0 \mathrm{~km} / \mathrm{h}\) on a smooth road and colliding with a horizontally mounted spring of spring constant \(6.25 \times 10^{3} \mathrm{~N} \mathrm{} \mathrm{m}^{-1}\). What is the maximum compression of the spring?

Solution: At maximum compression, the kinetic energy of the car is converted entirely into the potential energy of the spring.
The kinetic energy of the moving car is
\(
\begin{array}{c}
K=\frac{1}{2} m v^{2} \\
=\frac{1}{2} \times 10^{3} \times 5 \times 5 \\
K=1.25 \times 10^{4} \mathrm{~J}
\end{array}
\)
where we have converted \(18 \mathrm{~km} \mathrm{~h}^{-1}\) to \(5 \mathrm{~m} \mathrm{~s}^{-1}\) [It is useful to remember that \(36 \mathbf{k m ~ h}^{-1}=10 \mathrm{~m} \mathrm{~s}^{-1}\). At maximum compression \(x_{m}\), the potential energy \(V\) of the spring is equal to the kinetic energy \(K\) of the moving car from the principle of conservation of mechanical energy.
\(V=\frac{1}{2} k x_{m}^{2}\)
We obtain
\(
\begin{aligned}
&=1.25 \times 10^{4} \mathrm{~J} \\
x_{\mathrm{m}} &=2.00 \mathrm{~m}
\end{aligned}
\)
We note that we have idealized the situation. The spring is considered to be massless. The surface has been considered to possess negligible friction.

Example 6.14:

Calculate the maximum compression of the spring. shown in Figure 6.6, consider the coefficient of friction, \(\mu\), to be \(0.5\).

Solution: In the presence of friction, both the spring force and the frictional force act so as to oppose the compression of the spring as shown in Figure 6.6. We invoke the work-energy theorem, rather than the conservation of mechanical energy. The change in kinetic energy is
\(\Delta K=K_{f}-K_{t}=0-\frac{1}{2} m v^{2}\)
The work done by the net force is
\(
W=-\frac{1}{2} k x_{m}^{2}-\mu m g x_{m}
\)
Equating we have
\(\frac{1}{2} m v^{2}=\frac{1}{2} k x_{m}^{2}+\mu m g x_{m}\)
Now \(\mu \mathrm{mg}=0.5 \times 10^{3} \times 10=5 \times 10^{3} \mathrm{~N}\) (taking \(g=10.0 \mathrm{~m} \mathrm{~s}^{-2}\) ). After rearranging the above equation we obtain the following quadratic equation in the unknown \(x_{m}\).
\(
\begin{array}{l}
k x_{m}^{2}+2 \mu m g x_{m}-m v^{2}=0 \\
x_{m}=\frac{-\mu m g+\left[\mu^{2} m^{2} g^{2}+m k v^{2}\right]^{1 / 2}}{k}
\end{array}
\)
where we take the positive square root since \(x_{m}\) is positive. Putting in numerical values we obtain
\(x_{m}=1.35 \mathrm{~m}\)

You cannot copy content of this page